Rainbow Electronics AT89C5132 - Manual (Page 25)

25
AT89C5132
4256A–USB–06/03
API Commands Several types of APIs are available:
•
Read/Program Flash memory
• Read Configuration and Manufacturer Information
• Program Configuration Information
• Erase Flash
• Start bootloader
Read/Program Flash Memory To read the Flash memory the bootloader is not involved.
For more details on these routines see the AT89C5132 Datasheet, section “Pro-
gram/Code Memory”.
Two routines are available to program the Flash:
– __api_wr_code_byte
– __api_wr_code_page
• The application program load the column latches of the Flash then call the
__api_wr_code_byte or __api_wr_code_page see datasheet, section
“Program/Code Memory
”.
• Parameter settings
• Instruction: LCALL FFF0h.
Note: No special resources are used by the bootloader during this operation
API Name api_command api_dph api_dpl api_value
__api_wr_code_byte
__api_wr_code_page
0Dh – – –