Rainbow Electronics AT89LP216 - Manual (Page 17)

17
3621A–MICRO–6/06
AT89LP216 [Preliminary]
Figure 11-3. Reset Recovery from Power-down.
Table 11-1. PCON – Power Control Register
PCON = 87H Reset Value = 000X 0000B
Not Bit Addressable
SMOD1 SMOD0 PWDEX POF GF1 GF0 PD IDL
Bit 7 6 5 4 3 2 1 0
PWD
RST
XTAL1
tSUT
Internal
Clock
Internal
Reset
Symbol Function
SMOD1 Double Baud Rate bit. Doubles the baud rate of the UART in Modes 1, 2, or 3.
SMOD0 Frame Error Select. When SMOD0 = 1, SCON.7 is SM0. When SMOD0 = 1, SCON.7 is FE. Note that FE will be set after
a frame error regardless of the state of SMOD0.
PWDEX Power-down Exit Mode. When PWDEX = 1, wake up from Power-down is externally controlled. When PWDEX = 1, wake
up from Power-down is internally timed.
POF Power Off Flag. POF is set to “1” during power up (i.e. cold reset). It can be set or reset under software control and is not
affected by RST or BOD (i.e. warm resets).
GF1, GF0 General-purpose Flags
PD Power-down bit. Setting this bit activates power-down operation.
IDL Idle Mode bit. Setting this bit activates Idle mode operation