Rainbow Electronics MAX1464 - Manual (Page 37)

MAX1464
Low-Power, Low-Noise Multichannel
Sensor Signal Processor
______________________________________________________________________________________ 37
BIT NAME DESCRIPTION
15–9 — Unused.
8 SELPWM2 Select PWM2 output: 1 = OUT2LG, 0 = OUT2SM.
7–5 — Unused.
4 SELDAC2 Select DAC2 output: 1 = OUT2LG (large op-amp buffer), 0 = OUT2SM (small op-amp buffer).
3–1 — Unused.
0 SELREF2 Select voltage reference for DAC2: 0 = V DD , 1 = 2 x V REF .
Table 26. DOP2_Config (Address = 15h)
BIT NAME DESCRIPTION
15–2 — Unused.
1 BUF2 1 = buffer mode of both large and small op amps of DOP2, 0 = normal.
0 BUF1 1 = buffer mode of both large and small op amps of DOP1, 0 = normal.
Table 27. OpAmp_Config (Address = 30h)