Rainbow Electronics MAX1669 User Manual

General description, Applications, Features

Advertising
background image

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.

General Description

The MAX1669 fan controller includes a precise digital
thermometer that reports the temperature of a remote
sensor. The remote sensor is a diode-connected transis-
tor—typically a low-cost, easily mounted 2N3906 PNP
type—replacing conventional thermistors or thermocou-
ples. Remote accuracy is ±3°C for transistors from multi-
ple manufacturers, with no calibration needed. The
MAX1669 has an independent fan controller with a low-
current logic output requiring external power compo-
nents to interface to a DC brushless fan. The fan
controller has two modes of operation: a low-frequency
(20Hz to 160Hz) PWM mode intended for driving the fan
motor, or a high-impedance DAC output that generates
a variable DC control voltage. In PWM mode, the FAN
frequency can be synchronized to an external clock.

Other key features include general-purpose inputs/out-
puts (GPIOs) for fan presence detection and a thermo-
stat output intended as a fan override signal in case the
host system loses the ability to communicate. The inter-
nal ADC has a wide input voltage range and gives
overrange readings when too large an input voltage is
applied. Other error-checking includes temperature
out-of-range indication and diode open/short faults.

The MAX1669 is available in a space-saving 16-pin
QSOP package that allows it to fit adjacent to the
SLOT1 connector.

Applications

Pentium

®

CPU Cooling

Desktop Computers

Notebook Computers

Servers

Workstations

Features

♦ Measures Remote CPU Temperature
♦ No Calibration Required
♦ 20Hz to 160Hz PWM Output for Fan
♦ PWM Frequency Sync Input (260kHz)
♦ Flexible Fan Interface: Linear or PWM
♦ SMBus 2-Wire Serial Interface
♦ Programmable Under/Overtemperature Alarms
♦ ALERT Latched Interrupt Output
♦ OVERT Thermostat Output
♦ Two GPIO Pins
♦ Write-Once Configuration Protection
♦ Supports SMBus Alert Response
♦ ±3°C Temperature Accuracy (-40°C to +125°C,

remote)

♦ 3µA Standby Supply Current
♦ +3V to +5.5V Supply Range
♦ Small 16-Pin QSOP Package

MAX1669

Fan Controller and Remote Temperature Sensor

with SMBus Serial Interface

________________________________________________________________ Maxim Integrated Products

1

16

15

14

13

12

11

10

9

1

2

3

4

5

6

7

8

I/O1

OVERT

ALERT

SMBDATA

SMBCLK

PGND

FAN

SYNC

V

CC

TOP VIEW

MAX1669

QSOP

I/O2

ADD0

AGND

ADD1

ADD2

DXN

DXP

19-1574; Rev 0; 1/00

PART

MAX1669EEE

-40°C to +85°C

TEMP. RANGE

PIN-PACKAGE

16 QSOP

Pentium is a registered trademark of Intel Corp.

Pin Configuration

Ordering Information

Typical Operating Circuit appears at end of data sheet.

Advertising