Rainbow Electronics MAX1563 User Manual

General description, Applications, Features

Advertising
background image

General Description

The MAX1562/MAX1562H/MAX1563 single current-
limited switches provide up to 4A to power up to eight
USB ports. They operate from a 4V to 5.5V input
supply and consume only 40µA of quiescent current
when operating and only 3µA in shutdown.

The MAX1562/MAX1562H/MAX1563s’ autoreset feature
latches the switch off if the output is shorted, thereby
saving system power. When the short is removed, the
switch is reactivated. A fault-blanking feature enables the
circuit to ignore momentary faults, such as those caused
when hot swapping a capacitive load, preventing false
alarms to the host system. Fault blanking also prevents
fault signals from being issued when the device powers
up the load.

The MAX1562/MAX1562H/MAX1563 provide several
safety features to protect the USB port. Built-in thermal-
overload protection turns off the switch when the die
temperature exceeds +160°C. Accurate internal cur-
rent-limiting circuitry protects the input supply against
both overload and short-circuit conditions. An open-
drain fault signal (FAULT) notifies the microprocessor
when a thermal-overload, current-limit, undervoltage
lockout (UVLO), or short-circuit fault occurs.

The MAX1562 has an active-low ON, and the
MAX1562H has an active-high ON enable input. The
MAX1563 has a selectable active-high or active-low
logic-controlled enable. The current limit is pro-
grammed from 1A to 4A using a resistor.

The MAX1562/MAX1562H are available in 8-pin SO
packages and are pin-compatible upgrades to the
MIC2545A/MIC2549A. The MAX1563 provides the
same features and higher current performance in a
smaller 12-pin (4mm x 4mm) QFN package. These
devices operate over an extended temperature range
(-40°C to +85°C). An evaluation kit is available to speed
designs.

Applications

Notebook Computers

Desktop Computers

USB Ports and Hubs

PDAs and Palmtop Computers

Docking Stations

Features

♦ Programmable Current Limit (1A to 4A) with

Resistor

♦ Autoreset Feature Saves System Power
♦ 20ms Fault-Blanking Circuitry
♦ Active-High/Low Control Logic
♦ Fault-Indicator Output
♦ Thermal-Overload Protection
♦ Smaller 4mm x 4mm QFN Package (MAX1563)
♦ 3µA Shutdown Current
♦ UL Certification Pending

MAX1562/MAX1562H/MAX1563

Programmable 4A USB Current-Limited

Switches with Autoreset and Fault Blanking

________________________________________________________________ Maxim Integrated Products

1

Ordering Information

19-2631; Rev 0; 7/03

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

EVALUATION KIT

AVAILABLE

Pin Configurations appear at end of data sheet.

PART

TEMP RANGE

PIN-PACKAGE

MAX1562ESA

-40°C to +85°C

8 SO

MAX1562HESA

-40°C to +85°C

8 SO

MAX1563ETC

-40°C to +85°C

12 QFN 4mm x 4mm

MAX1562

MAX1562H

MAX1563

FAULT

OUT

OUT

ISET

SEL

ON

IN

IN

USB
PORT

GND

INPUT

4V TO 5.5V

MAX1563
ONLY

ACTIVE-HIGH/ACTIVE-LOW

SELECTABLE

Typical Operating Circuit

Advertising