Typical operating characteristics (continued), Pin description – Rainbow Electronics MAX1531 User Manual

Page 10

Advertising
background image

MAX1530/MAX1531

Multiple-Output Power-Supply Controllers for
LCD Monitors

10

______________________________________________________________________________________

Typical Operating Characteristics (continued)

(Circuit of Figure 1; including R5, R6, and D2; T

A

= +25°C, unless otherwise noted.)

Pin Description

PIN

MAX1530

MAX1531

NAME

FUNCTION

1

1

DRV2

Gamma Linear Regulator (LR2) Base Drive. Open drain of an internal N-channel MOSFET.
Connect DRV2 to the base of an external PNP pass transistor to form a positive linear
regulator. (See the Pass Transistor Selection section.)

2

2

FBL2

Gamma Linear Regulator (LR2) Feedback Input. FBL2 regulates at 1.245V nominal.
Connect FBL2 to the center tap of a resistive voltage-divider between the LR2 output and
AGND to set the output voltage. Place the divider close to the FBL2 pin.

3

3

FBL3

Gate-On Linear Regulator (LR3) Feedback Input. FBL3 regulates at 1.245V nominal.
Connect FBL3 to the center tap of a resistive voltage-divider between the LR3 output and
AGND to set the output voltage. Place the divider close to the FBL3 pin.

4

4

DRV3

Gate-On Linear Regulator (LR3) Base Drive. Open drain of an internal N-channel MOSFET.
Connect DRV3 to the base of an external PNP pass transistor to form a positive linear
regulator. (See the Pass Transistor Selection section.)

5–10, 18, 19

—

N. C.

No Connection. Not internally connected.

11

11

RSTIN

Adjustable Reset Input. RESET asserts low when the monitored voltage is less than the
reset trip threshold. RESET goes to a high-impedance state only after the monitored
voltage remains above the reset trip threshold for the duration of the reset timeout period.
Connect RSTIN to the center tap of a resistive voltage-divider between the monitored
output voltage and AGND to set the reset trip threshold. The internal RSTIN threshold of
90% of 1.238V allows direct connection of RSTIN to any of the device’s positive feedback
pins.

LR5 NORMALIZED LOAD REGULATION

MAX1530 toc25

LOAD CURRENT (mA)

VOLTAGE ERROR (%)

40

30

20

10

-0.8

-0.6

-0.4

-0.2

0

-1.0

0

50

LR5 NORMALIZED LINE REGULATION

MAX1530 toc26

INPUT VOLTAGE (V)

OUTPUT-VOLTAGE ERROR (%)

-13

-17

-21

0

0.2

0.4

0.6

0.8

1.0

-0.2

-25

-9

20mA LOAD CURRENT

Advertising