Rainbow Electronics LM83 User Manual

General description, Features, Key specifications

Advertising
background image

LM83
Triple-Diode Input and Local Digital Temperature Sensor
with Two-Wire Interface

General Description

The LM83 is a digital temperature sensor with a 2 wire serial
interface that senses the voltage and thus the temperature of
three remote diodes using a Delta-Sigma analog-to-digital
converter with a digital over-temperature detector. The LM83
accurately senses its own temperature as well as the tem-
perature of three external devices, such as Pentium II

®

Pro-

cessors or diode connected 2N3904s. The temperature of
any ASIC can be detected using the LM83 as long as a dedi-
cated diode (semiconductor junction) is available on the die.
Using the SMBus interface a host can access the LM83’s
registers at any time. Activation of a T_CRIT_A output oc-
curs when any temperature is greater than a programmable
comparator limit, T_CRIT. Activation of an INT output occurs
when any temperature is greater than its corresponding pro-
grammable comparator HIGH limit.

The host can program as well as read back the state of the
T_CRIT register and the four T_HIGH registers. Three state
logic inputs allow two pins (ADD0, ADD1) to select up to 9
SMBus address locations for the LM83. The sensor powers
up with default thresholds of 127˚C for T_CRIT and all
T_HIGHs. The LM83 is pin for pin and register compatible
with the LM84 as well as the Maxim MAX1617 and the Ana-
log Devices ADM1021.

Features

n

Accurately senses die temperature of 3 remote ICs, or
diode junctions

n

On-board local temperature sensing

n

SMBus and I

2

C compatible interface, supports

SMBus 1.1 TIMEOUT

n

Two interrupt outputs: INT and T_CRIT_A

n

Register readback capability

n

7 bit plus sign temperature data format, 1 ˚C resolution

n

2 address select pins allow connection of 9 LM83s on a
single bus

Key Specifications

j

Supply Voltage

3.0V to 3.6V

j

Supply Current

0.8mA (max)

j

Local Temp Accuracy (includes quantization error)

0˚C to +85˚C

±

3.0˚C (max)

j

Remote Diode Temp Accuracy (includes quantization

error)

+25˚C to +100˚C

±

3˚C (max)

0˚C to +125˚C

±

4˚C (max)

Applications

n

System Thermal Management

n

Computers

n

Electronic Test Equipment

n

Office Electronics

n

HVAC

Simplified Block Diagram

SMBus

is a trademark of the Intel Corporation.

Pentium II

®

is a registered trademark of the Intel Corporation.

I2C

®

is a registered trademark of the Philips Corporation.

DS101058-1

November 1999

LM83

T

riple-Diode

Input

and

Local

Digital

T

emperature

Sensor

with

T

wo-W

ire

Interface

© 2000 National Semiconductor Corporation

DS101058

www.national.com

Advertising