B&B Electronics 850-18510 - Manual - Manual (Page 11)

8
AutoCross Feature for Twisted Pair Connection
All twisted pair ports on the IE-iMcV-Gigabit TX/SFP include AutoCross, a feature
that automatically selects between a crossover workstation and a straight-
through connection depending on the connected device.
LED Operation
Each IE-iMcV-Gigabit TX/SFP Module features diagnostic LEDs that provide
information on features and ports.
LNK/ACT Glows green when a twisted pair link is
established.
Blinks green when activity is detected.
Located on RJ-45 connector.
FDX Glows amber when port is operating in
Full-Duplex Mode on the RJ-45
connector.
FXLL Glows green when FX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the fiber
port and actively disables the copper
port.
TXLL Glows green when TX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the
copper port and actively disables the
fiber port.
LNK Glows green when fiber link is
established.
FA Glows amber when FiberAlert is
enabled.
Blinks when a fault occurs on the RCV
fiber line and actively disables the XMT
fiber line.