B&B Electronics EIR610-3SFP-T - Manual - Manual (Page 96)

88
Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Ring Port fails, the system will automatically upgrade the 2 nd Ring
Port to be the working port.
„ Enable Coupling Ring: Mark the check box to enable the coupling ring
function.
„ Coupling port: Assign the member port.
„ Control port: Set the switch as the master switch in the coupling ring.
„ Enable Dual Homing: Set up one of port on the switch to be the Dual
Homing port. In an X-Ring group, only one port can be the Dual Homing
port. Dual Homing only works when the X-Ring function is enabled.
„ Click
Apply
X-ring Interface
Note 1. When X-Ring function is enabled, disable the RSTP function. X-Ring
and RSTP cannot exist at the same time.
2. If the configuration is not saved, it will be lost when the switch is
powered off.