B&B Electronics SPP-100 - Manual - Manual (Page 33)

5. Windows 2000/XP Installation
To simplify the installation of the SPP-100 on Windows 2000/XP based
systems, an
configuration file is provided on the distribution disk. This
configuration file supports the SPP-100 in both standard printer port
mode and EPP mode.
5.1 Installing an SPP-100 in Windows 2000/XP.
1. Insert the SPP-100 into any available PC Card socket.
2. The first time a new PC Card type is installed the New
Hardware Found window opens. After this first installation
Windows 2000/XP will automatically detect and configure the
card. If the New Hardware Found window does not open, then
skip to the next section, "SPP-100 Resource Settings".
Figure 10. SPP-100 Driver Installation in Windows 2000/XP
3. The New Hardware Found window provides several options to
configure the SPP-100 card. Click the Search for a suitable
driver option. Click Next to continue.
Quatech Inc. 5-1