Appendix a: default gateway settings – B&B Electronics MESR900 Series - Fiber Models - Manual User Manual
Page 69
Advertising

9. Appendices
VlinxMESR9xx Modbus Gateway
Page 65
Manual Documentation Number MESR9xx-2113m
www.bb-elec.com/
www.bb-europe.com/
Appendix A: Default Gateway Settings
Setting Default Value
Gateway Name User assigned
Password password field is blank from factory
DHCP Enabled
IP Address
DHCP will configure. If a DHCP Server is
not available, the unit will default to
169.254.102.39
Net Mask 255.255.0.0
Gateway 169.254.102.100
MAC Address Fixed - see bottom label
Firmware Version (Vx.x.x)
Hardware Version (Vx.x.x)
Port 1, 2
Serial port mode RS-232
Baud Rate 9600
Data bits 8
Parity None
Stop bits 1
Flow Control None
Protocol TCP
Serial timeout 0 seconds
Inter-character timer 0 ms
TCP port Port 1 = 4000
Port 2 = 4001
Max connection 1
Advertising