For windows® xp, For windows® server 2003 – B&B Electronics DS-PCIE-100 - Manual User Manual
Page 4
May/07
MN2000000083
4
D:\Drivers\PCIExpress\DS-PCIE-100\2000, then click OK.
(Change D: to match your CD-ROM driver letter)
5.
Click Next and Finish.
6.
Restart Windows to complete the installation.
For Windows® XP
1.
At the Found New Hardware Wizard, select Install from a list
or specific location (Advanced), then click Next.
2.
Insert the Driver CD, check Include this location in the search,
uncheck the other box, type in the following path
D:\Drivers\PCIExpress\DS-PCIE-100\XP, then click OK.
(Change D: to match your CD-ROM drive letter)
3.
If the Hardware Installation window pops up, click Continue
Anyway, then Finish. Our driver has been thoroughly tested for
stability and compatibility.
4.
Repeat steps 1-3 two more times.
5.
Restart Windows to complete the installation.
For Windows® Server 2003
1.
At the Found New Hardware Wizard, select Install from a list
or specific location (Advanced), then click Next.