B&B Electronics R-SeeNet-5 - Manual - Manual (Page 22)

15
4. DESCRIPTION OF THE WEB INTERFACE
Continued from previous page
Column Description
Note Any user-defined note about the router
Location Location of the router (it can be changed by the Edit operation,
see line at the bottom). If Read location box on the Options page
is checked, R-SeeNet reads location, which is set in the router.
Tx Total size of transmit data
Rx Total size of received data
Total Total size of transferred data (transmit and received)
Level Signal quality of the currently selected cell
Data service Type of transmission technology
Firmware Current firmware version loaded in the router
Report After clicking this button, the report of selected router is displayed
Enabled If it ’s checked, reading from the router via SNMP is enabled
AutoUpdate Enables automatic updating of router configuration
Access mode Informs about the way of reading the router:
• Polling – router is reading in a standard way
• SNMP trap – router is reading via SNMP traps
SN Serial number of the router
MAC MAC address of the router
IMEI IMEI number of module in the router (if it ’s available)
ESN ESN number of module in the router (if it
’s available)
Group Name of the routers group into which the router belongs
Operation – Edit Editing information about the router (pencil icon)
Operation
– Remove Removes the router from the list (red cross icon)
Device Selection Used to change the properties or delete multiple routers at once.
Routers that require the multiple change of the properties are se-
lected using the check boxes in this column. Routers will be added
to the Selected Device list using the Checked button. To add all of
routers use the All button.
Table 1: Device List description
Functions in the Operation column (i.e. Edit and Remove) are only available to users with
administrative privileges.
Properties of Hostname and Hostname Alt items:
• After you place cursor on any IP address, the date and time of the last router reading are
displayed. Press the IP address to display statistics for this router (Device Status).