C.17 board id registers - base+20, Table c-22: register for board id, C.18 programmable timer/counter registers base+24 – B&B Electronics PCI-1711 - Manual User Manual
Page 100: Base+26, base+28 and base+30, Table c-21, Calibration command and data register, Table c-22, Register for board id
Advertising
Appendix C
– 92 –
PCI-1710 series User’s Manual
Advantech Co., Ltd.
www.advantech.com
C.17 Board ID Registers - BASE+20
The PCI-1716/1716L offers Board ID register BASE+20. With correct
Board ID settings, user can easily identify and access each card during
hardware configuration and software programming.
Table C-22: Register for Board ID
C.18 Programmable Timer/Counter Registers
BASE+24, BASE+26, BASE+28 and BASE+30
The four registers of BASE+24, BASE+26, BASE+28 and BASE+30 are
used for the 82C54 programmable timer/counter. Please refer to
Appendix D 82C54 Counter Chip Functions for detailed application
information.
Note!
✎ Users have to use a 16-bit (word) command to read/write each register.
Read
Board ID
Bit #
7
6
5
4
3
2
1
0
BASE + 20
BD3
BD2
BD1
BD0
Advertising