B&B Electronics 858-18121 - Manual - Manual (Page 11)

7
DIP
Switch
Name Description Default
Setting
1 Dual Enable dual channel OFF
2 1+1 Provides 1+1 protection with non-revertive switching OFF
3 1+1 Revert Provides 1+1 protection with revertive switching OFF
4 LoSpd B Force SFP "B" for low-speed operation OFF
5 LoSpd A Force SFP "A" for low-speed operation OFF
6 Reserved
Mini-Serial Port
A console port, located at the top of the faceplate, allows the customer to use a local
RS-232 serial interface for management. A special mini-jack to DB9-F cable is
provided with the product for direct connection to a PC serial port.
NOTE
To log on through the serial port, set the computer/terminal for VT-100 emulation,
with: 38.4K baud, 8 data bits, 1 stop bit, no parity, no FlowControl.