B&B Electronics ENSAM315 - Datasheet - Manual (Page 2)

ENxxHarshDutyCables-0903-2/3
.
International Headquarters:
707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]
Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] [email protected]
Integrate
– Expand
– Simplify
B&B ELECTRONICS
PRODUCT INFORMATIONPRODUCT INFORMATIONPRODUCT INFORMATIONPRODUCT INFORMATION
Closure Cap
Maintains sealing integrity when a connector is not mated with the receptacle.
67-0300 .............. IP67 rated closure cap with lanyard
Standard PCB Board Receptacle
Highly flexible, enables an OEM or end-user to solder a cable lead to an internal Ethernet
connection.
ENSR1FB5............. Receptacle with PC board
ENSR1FB5C305 .... Receptacle with PCB & 12” of cable (1oBase-T)
Bulkhead Passthrough
To bring Ethernet into a cabinet or control box, simply create the sealed connection on the
outside of the enclosure, and run a commercial patch cord from the backside RJ-45 jack to
your PLC, I/O, or Ethernet Control Board. No conduit entry is required.
ENSP1F5 ............RJ-45 Bulkhead passthrough with backside jack
ENSP1F5C305....RJ-45 Bulkhead passthrough with 12” of patch cord
Receptacle Specifications
O-Ring Material: Nitrile Rubber
Receptacle Shell Material: Acrylonitrile-Butadiene-Styrene (ABS)—standard version
Knockout Hole for Receptacle: 1.031
Mating Thread: UNC 1” - 14
Operating Temperature: -20 to 80 °C
Return Loss: 5 dB @ 100 MHZ
Shock/Vibration: Per IEC 60068-2-6
Environmental Rating: IEC IP67
TIA/EIA Rating
110 Punchdown:
Category 5e compliant
Bulkhead Passthrough: Category 5e compliant
Direct PCB Mount: Category 5 compliant
Standard PC Board: Not Rated—additional customer termination is required
RJ-45 Jack
Base Material:
Copper alloy w/30 µ -inches, gold alloy
Underplating: 2.54 microns of nickel
Mating Cycles: 250, minimum
Current Rating: 1.5 Amp
Voltage Rating: 125 VDC