B&B Electronics ZZ24D-NA(NB,NC,ND)-SR - Manual - Manual (Page 54)

Configuration & Operation
48 Manual Documentation Number: pn7515_ZlinxIO-0712m
An input tree appears listing all Base and Expansion Modules in the system and the inputs/outputs available on them.
Figure41Digital Input Configuration
2. Select the Digital Input to be configured.
3. Select Discrete or Counter (for the first two inputs only). Setting the Digital Mode of either of the first two DI’s to Counter
mode sets both DI’s on that module to the same mode.
NOTE: See section 3.3.5 “Modbus Counters”.
4. Select the Digital Output to be configured.
5. Select Invert Output option.
Figure42Digital Output Configuration
6. Select the Analog Input to be configured.
7. Select the required Analog Mode (0 to 10 VDC or 0 to 20 mA).