Using iview – B&B Electronics 856-14205--29 - Manual User Manual
Page 51
Appendix A: iView
2
Management Software
46
USING IVIEW
2
iView² is management software that provides network management in an easy
to use GUI. Once iView² is installed on a network management PC using a
Windows operating system, use the Start menu to access iView².
Note: Windows SNMP services must be installed to receive
Traps.
The autoscan feature of iView² will detect B&B Electronics devices on an active
subnet and list them in the network outline. Click the connection for the iMcV-
Giga-FiberLinX-III to open its iView² screen. To perform additional configuration,
select the iView
2
iConfig view icon on the toolbar in iView². This allows a session
to be launched, and the default password/username is admin/admin. Additional
private usernames and passwords can be entered in the USERS tab. If the list of
passwords is not maintained, the usernames and passwords can be reset by
opening a CLI session and typing in the cleandb command. This will reset all but
the IP address of the device.
iView
2
main screen.