BabyTrend 8206BCC - MALAWI DELUXE NURSERY CENTER - Manual (Page 7)

NOTE: Playard MUST be in a locked set-up position before installing
and using the bassinet feature.
CONTENTS:
1 Nylon Bassinet Insert
ASSEMBLY
NOTE: The printed warning label should be facing toward the inside
of the bassinet so that it is readable. The bassinet is oriented with the
canopy opposite from the changing area.
1. The top corner pieces of the playard with slots as shown in (Fig. 1) is the
changing area end. Locate the 4 pieces of hook and loop fasteners on the
bassinet insert (as shown in Fig. 2) which hold the canopy. Orient the
bassinet with the hook and loop fasteners at the opposite end from the
changing table as shown in (Fig. 3).
2. Place assembled bassinet onto the Playard. Push down each of the
bassinet supports onto the playard frame as shown in (Fig. 4).
3. Place the Playard mattress into the bassinet with the padded side facing
up as shown in (Fig. 5).
4. Connect the canopy to the Playard frame as shown in (Fig. 6)
PLEASE NOTE THE CANOPY IS INTENDED FOR INDOOR
USE ONLY.
7
TO ASSEMBLE YOUR BASSINET
Figure 1
Figure 2
Figure 3.
Figure 4. Figure 6.
PUSH DOWN
Figure 5.
CHANGING
TABLE END
CANOPY END