PowerWalker ATS - Manual (Page 4)

EN
Indication
type
LED description LED status Condition Alarm
Priority
setting LEDs
Source A () ON
Source A is priority OFF
Source B () OFF
Source A () OFF
Source B is priority OFF
Source B () ON
Power source
status
Status of source A
()
OFF Inlet A has no power input OFF
ON
Inlet A has power input, and power is
OK
OFF
Flashing
Inlet A has power input, but power is
out of SPEC
OFF
Status of source B
()
OFF Inlet B has no power input OFF
ON Inlet B has power, and power is OK OFF
Flashing
Inlet B has power input, but power is
out of SPEC
OFF
Output status
Output from
source A ()
ON
Power A is output OFF
Output from
source B ()
OFF
Output from
source A ()
OFF
Power B is output OFF
Output from
source B ()
ON
Output from
source A ()
OFF
NO OUTPUT OFF
Output from
source B ()
OFF
Alarm Fault ()
OFF Alarm not present OFF
ON Alarm present Continuously