Peerless-AV HLG440-LG-Q10 - Installation - Manual (Page 4)

ISSUED: 12-13-10 SHEET #: 090-9197-7 08-18-13
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
4 of 8
PoINt 1
PoINt 2
tABLe toP
Use lock-down plate ( A) as a template to mark location of holes at point 1 and point 2, spaced 7.00" apart on
table. Drill two holes using a 9/32'' drill bit. Carriage bolts ( D) must be placed into slots as shown in fig. 1.6 before
mounting lock-down plate to display.
Models: 37LD350C, 37LD450C, 42LD350C, 42LD450C, 32LD452C, 37LD452C,
42LD452C, 47LD452C
Fig. 1.5 Fig. 1.6
7.00"
(178 mm)
A
D
SLotS
1
Four 10-32 X 3/8" undercut
flathead screw ( B)
Note: Do not over tighten screws
Note: Must tighten first
One #10 X 3/8" undercut
flathead self drilling screw ( C)
Note: Must tighten second
Mounting Pattern for Attaching to the Display Base:
Skip to step 3 Page 7
Note: Before mounting lock-down plate to display base use detail 1 to determine mounting holes used in step 3.
DetAIL 1
2