Peerless-AV HS432-002 - Installation - Manual (Page 5)

ISSUED: 09-07-07 SHEET #: 124-9114-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
5 of 6
Close slideout assembly (A) and place in the center of mounting surface of cabinet. Align handle of slideout
assembly flush with front of cabinet as shown in figure 3.1.
Using the slideout assembly (A) as a template, mark the center of the six mounting holes. Extend slideout assembly
and attach to cabinet using six 10-16 x 3/4" penta-pin screws (I), tighten using Penta-pin tool (N).
3
4
fig. 3.1
fig. 3.2
Align holes of adapter plate assembly (B) with adjustment holes of adapter support tube (C) to the desired height of
screen. Secure adapter plate assembly (B) to adapter support tube (C) with two M5 x 10 mm socket pin security
head screws (H). Attach rubber bumper (P) to the base tube (E) using a M4 x 10 mm phillips screw (Q).
NOTE: Cabinet not shown for clarity
HANDLE ALIGNS FLUSH WITH
FRONT OF CABINET
A
A
I
C
H ADJUSTMENT HOLES
B
P
Q
E