Peerless-AV IWB600-2SB - Installation - Manual (Page 7)

7 of 13 ISSUED: 11-09-10 SHEET #: 125-9154-4 12-21-10
Marsh Board
J
K
3
Fasten two support brackets (supplied with Marsh Board) to bottom of vertical supports ( B) using four M5 x 12 mm
phillips screws ( K) and M5 serrated flanged lock nuts (J) as shown below.
NOTE: Make sure that the distance between the top of the support bracket and bottom of hole is 1/8".
NOTE: Use only the large bottom four mounting holes on vertical support (B).
4
Hook vertical brackets ( B) to wall bracket (A) and secure using two M5 x 8 mm phillips screws ( O)
as shown in detail 5.
1/8"
B
B
support brackets
(supplied with
Marsh Board)
support brackets
(supplied with
Marsh Board)
O
B
A
USE LARGE
BOTTOM HOLES
DETAIL 5
O