Peerless-AV HT642-002 - Installation - Manual (Page 9)

9 of 9 ISSUED: 03-02-11 SHEET #: 125-9192-1
Attach two M5 x 12 mm serrated washer head
socket pin screws ( J) to the bottom holes on the
sides of wall plate ( B) using the 4mm security allen
wrench ( F) provided.
Position slots of adapter bracket ( A) onto the two
M5 x 12 mm serrated washer head socket pin
screws ( J) attached to wall plate (B).
4 4-1
J
B
J
A
SLOT
B
Attaching Mounting Bracket Using Tilt Option
To secure wall plate ( B) to adapter plate (A), adjust tilt as desired and attach two M5 x 12 mm serrated washer
head socket pin screws ( J) into the slots on the sides of wall plate (A) and threaded inserts of adapter bracket (A).
Tighten with the 4 mm security allen wrench ( F).
4-2
J
B
A
J
MOUNTING SURFACE
NOT SHOWN FOR CLARITY
BOTTOM OF DISPLAY
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.