Peerless-AV SA752P - Installation - Manual (Page 6)

6 of 34 ISSUED: 03-26-10 SHEET #: 095-9345-5 11-02-11
NOTE: Refer to PLP model instruction sheet for attachment of dedicated PLP plate to display. Install two
M10 x 15mm screws (provided with dedicated PLP plate) into top two holes of dedicated PLP plate leaving 1/4" of
exposed thread as shown in fi gure 2.1.
Insert two M10 x 15mm screws (E) into bottom holes of adapter plate as shown in fi gure 2.2. Tighten all fasteners
with 6mm allen wrench (H).
2-1
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the display.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
Mounting Flat Panel Display
2
1/4"
M10 X 15MM SCREW
DEDICATED PLP PLATE
ADAPTER PLATE
fi g. 2.1
E
DEDICATED PLP PLATE
ADAPTER PLATE
fi g. 2.2
WARNING