Peerless-AV FPZ-646 - Installation - Manual (Page 5)

5 of 33 ISSUED: 1-25-11 SHEET #: 125-9150-7 09-28-12
1 Attach vertical tube (B) to support base (H) using one plastic bushing (AA), one M5 x 55 mm socket screw (R), and
M5 nut (S) as shown in detail 1. Tighten M5 x 55 mm socket pin screw (R) using 4 mm allen wrench (X).
2 Press three button bumpers (J) into shelf clamp bracket (C) as shown in fi gure 2.1
Press six button bumpers (J) into shelf support (I) as shown in fi gure 2.2.
Loosely fasten two 1/4-20 x 20 mm decorative screws (K) as shown in fi gure 2.3.
B
H
J
I
J
C
C
I
K
DETAIL 1
Figure 2.1 Figure 2.2
Figure 2.3
R
S
AA