Fig. 1.1 – Peerless-AV ACC942 - Installation User Manual

Page 16

Advertising

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-729-0307 or 708-865-8870.

16 of 25

5.60

7.40

8.40

6.40

7.50

4.60

7.17

1.00

13.50

3.54

.838

MAX

13.173

1.00

47LG50DC Option 1

#10 x 3/8 phillips self drilling screws (

Flip TV stand upside down and attach four additional rubber pads (

C) over existing pads. The width is measured

and located 3.7" from center line of display as shown below.

Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in fig

1.1. (supplied in FLD-UNV-LG)

Note: Use the same number of washers for both front lock-down brackets.

Extra washers are included in case additional height is required as shown in detail 1. Two are recommended

for each screw.

DETAIL 1

DESKTOP

fig. 1.1

Rubber pads (

(PLACE ON TOP OF EXISTING FEET)

Note: Use this option when optimum security is needed. Brackets may be flipped for more distance from the

edge of the table as shown on page 17 detail 3.

Advertising