Peerless-AV LT-320 - Installation - Manual (Page 4)

ISSUED: 06-09-05 SHEET #: 201-9486-2 06-04-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 7
G
POWER BLOCK
C
A
F
4 Optional: Power block instalation.
Note: If you are not attaching power block to the
adapter bracket, skip to step 5.
Attach power block with power block bracket (C)
using two M4 x 7 mm phillips screws (G) and two
washers (F).
5
Note: For concrete walls skip to step 5 on the
following page.
Note: For metal studs installation, please order
metal stud fastener kit ACC415.
For Single Stud Wood Walls drill two 5/32" (4 mm)
dia. holes to a minimum depth of 2.5" (64 mm).
Attach wall bracket (A) to center of wood stud using
two #14 x 2.5" wood screws (J). Use a stud finder to
locate center of stud.
J
A
For Double Stud Wood Walls drill four 5/32"
(4 mm) dia. holes to a minimum depth of 2.5" (64
mm). Attach wall bracket (A) to center of wood stud
using four #14 x 2.5" wood screws (J). Use a stud
finder to locate center of stud.
5
A
J