Peerless-AV HP437-C# (52-63) - Installation - Manual (Page 8)

8 of 9
ISSUED: 12-13-2013 SHEET #: 125-9086-9
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800 865-2112
G:\125\EPS_files\126631.eps
10
D
E K or L
DISPLAY
Secure right and left vertical brackets ( D and E) to display using four M4 x 12 mm phillips screws (K) and
#8 washers ( G) or four M6 x 12 mm phillips screws (L).
G
NOTE: To complete the installation, two keys for the cam locks must be obtained from the General Man-
ager or Purchaser/Receiver of the mounting product. The display and mount installation cannot be com-
pleted without these two keys. Be sure to return the keys to the General Manager or responsible party upon
completion of the installation. Only a limited number of keys is supplied per installation location.
Insert the keys into the bottom of the locks and rotate to the unlocked position as shown in Detail 4 and 5.
Note that the keys are NOT removable in the open position.
11
Detail 4 Detail 5