Braun 5414 Flex Integral - Manual (Page 10)

10
4.3 Shaving with the cord
If the cell unit is discharged, you may also
shave with the shaver connected to the mains
(100–240 V ~). (If the shaver should not run
immediately, charge it with the switch position «off»
for approx. 1 minute.)
5 Keeping your shaver in top
shape
5.1 Cleaning
• After shaving, switch the shaver off. Press the
release button, take off the triple shaving frame
and gently tap it out on a flat surface.
• Then thoroughly clean the duo cutter block with
the brush as well as the inner area of the pivoting
head. About every four weeks, clean the duo cutter
block with Braun cleaning agents.
• If you have a very dry skin and you notice a reduced
operation time of the shaver, you should put a
drop of sewing machine oil onto the triple shaving
frame.
5.2 Changing the shaving parts
To maintain optimum shaving performance, we
recommend to replace the triple shaving frame and
the duo cutter block every 1
1 / 2 year or when these
parts are worn.
Tips for the perfect shave
• We recommend to shave before washing, as the
skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90 °) to the skin.
• Stretch your skin and shave against the direction
of beard growth.
90
°
lock
5476097_4_bis_78 Seite 10 Dienstag, 14. Oktober 2003 10:33 10