Braun 5414 Flex Integral - Manual (Page 8)

8
English Our products are designed to meet the highest
standards of quality, functionality and design. We
hope you entirely enjoy your new Braun shaver.
Caution
• Do not use the shaver near, or over, basins filled with
water (e. g. bath tubs, showers etc.).
• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1 Foil protection cap
2 Triple shaving frame
3 Duo cutter block
4 Pop-out long hair trimmer
5 Switch lock
6 On/off switch
7 Charging light (green)
8 Low-charge light (red) (only 5416/5415)
9 Shaver socket
j Switch for locking the swivel head («head lock»)
and for activating the pop-out long hair trimmer
(«trimmer»)
q
Release button
2 Charging the shaver
• For the 3 first chargings: Connect the shaver to the
mains and charge it for at least 4 hours (switch
position «off»), then shave without the cord until the
red low-charge light lights up.
(Model 5414: Shave without the cord until the shaver
runs distinctly slower.)
The full capacity is only reached after several
charge/discharge cycles.
• Subsequent charges will take approximately 1 hour.
• Wattage: 5 Watts
Voltage range during charging: 12–240 V Q /
50 or 60 Hz (automatic adaption)
Best environmental temperature range for charging:
15 °C to 35 °C
of
f
on
lock
+35
°C
+15
°C
5476097_4_bis_78 Seite 8 Dienstag, 14. Oktober 2003 10:33 10