Peerless-AV DS-VW665 - Installation - Manual (Page 7)

7 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
Attach adapter brackets ( B) to back of display using four M6 x 12 mm socket pin screws (I) with
nylon shoulder washer ( H), or four M8 x 15 mm socket pin screws (J) as shown below.
NOTE: Hardware to attach dedicated plates to the mount are included with the dedicated plates.
H
I or J
2
300 mm
200 mm
PLP ADAPTER PLATE
Attaching Adapter Brackets to Display
DISPLAY
B
Attach adapter brackets ( B) and display onto channels on carriage assembly (A) as shown in figure 3.1.
Rotate lock bracket as shown in detail 1. Fasten one M4 x 8 mm socket pin serrated washer head screw ( M) into
slot on mount assembly ( A).
DISPLAY
A
3
FIGURE 3.1
CHANNEL
MAX VESA-600 mm
MIN VESA-200 mm
400 mm
DETAIL 1
LOCK BRACKET
BACK VIEW
B
M
A
SLOT