Peerless-AV HP455 - Installation - Manual (Page 7)

ISSUED: 06-28-12 SHEET #: 125-9328-2 7 of 9
V
H
NOTE: Determine desired height of display prior to attaching
lower horizontal rail ( S) and upper horizontal rail (V) to
support tube ( A).
Attach tube gussets ( R), lower adapter rail (S), and upper
horizontal tube ( V) onto support tube (A) using two 1/4-20 x
3/4" hex head screws ( H) with two 1/4" split washers (U) as
shown below.
10 11 Position tube gussets ( R) inside slots of lower
horizontal rail ( S) and upper horizontal rail (V)
as shown below.
R
S
S
SLOT
SLOT
Fasten two socket pin screws ( I, O, or P) into the top mounting holes behind the screen leaving 1/8" of exposed
threads as shown below.
Hook exposed threads onto the top of vertical rails ( T) and secure lower horizontal rail (S) using two socket pin
screws ( T, O,P, or V).
1/8"
SCREEN SCREEN
12
(T,O,P, or V)
(I, O, or P)
T
Mounting using Large Hole Pattern
(300 mm x 300 mm or greater)
A
U
V
NOTE: When using socket pin screw (I), #10 flat washers (Q) are required.