Peerless-AV PT630 - Installation - Manual (Page 6)

6 of 23 ISSUED: 11-19-07 SHEET #: 202-9245-5 09-01-11
Attaching Hook Bracket to Display with VESA 75 or 100 Mounting Pattern
FOR VESA ® 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of display using four
M4 x 10 mm screws (E) as shown below.
*NOTE: If hole pattern is in a pocket, attach
mounting plate (B) to back of display using four
M4 x 20 mm screws (F) and four retaining spacers
(G) as indicated below.
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of display using four
M4 x 10 mm screws (E) as shown below.
2
E
E
B
B
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING
*For displays with a
hole pattern in a pocket,
spacers (G) go between
mounting plate (B) and
display.
G