Peerless-AV ESHV20 - Installation - Manual (Page 7)

7 of 27 ISSUED: 01-17-11 SHEET #: 083-9013-1
Attach shelf bracket (J) to shelf attachment clamp (D) using two M5 x 18mm screws (E) and
washers (I) shown in fi gure 5.1 using 4mm allen wrench (M). Adjust the level of the shelf bracket
(J) to desired height then tighten knob to secure. 4
D
D
J
E
J
J
K
F
E
I
I
G
KNOB
KNOB
Attach shelf bracket (J) and glass support bracket (G) to shelf attachment clamp (D) using two
M5 x 18mm screws (E) and washers (I) shown in fi gure 6.1 using 4mm allen wrench (M). Adjust
the level of the shelf bracket (J) to desired height then tighten knob to secure.
Place glass shelf (K) onto shelf bracket (J) and secure with M5 x 12mm screw (F) as shown in
fi gure 6.2 using 2.5mm allen wrench (N).
NOTE: Overtightening the screws may cause damage to glass shelf (K).
5
fi g. 5.1
fi g. 6.1
fi g. 6.2
ACCSH100 and ESHV10 Models
ACCSH200 and ESHV20 Models