Sena Bluetooth SPH10H-FM v4.3 User's Guide - Manual (Page 21)

SPH10H-FM
20
9.7 Exit Voice Configuration Menu
Voice Prompt “Exit configuration”
Factory Default N/A
Enable Tap the Phone Button
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, “Exit configuration”, and tap the Phone Button
to confirm. Taping the Jog Dial is not available for this
setting.
Rotate Jog Dial Tap Phone Button Tap Jog Dial
Speed Dial Execute N/A
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
RDS AF Setting Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Configuration Menu & Button Operations
Note:
RDS feature may be available when radio channel station
provides equivalent service.
9.6 Delete All Bluetooth Pairing Information
Voice Prompt “Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the SPH10H,
rotate the Jog Dial until you hear a voice prompt, “Delete
all pairings”, and tap the Phone Button to confirm.
Taping the Jog Dial is not available for this setting.