Driving your vehicle – KIA Borrego 2008 User Manual
Page 302
Driving your vehicle
40
5
E090100AHM-EU
To set cruise control speed:
1. Pull the CRUISE ON-OFF switch on
the steering wheel to turn the system
on. The CRUISE indicator light in the
instrument cluster will illuminate.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
3. Push the -/SET switch, and release it at
the desired speed. The SET indicator
light in the instrument cluster will illumi-
nate. Release the accelerator at the
same time. The desired speed will auto-
matically be maintained.
On a steep grade, the vehicle may slow
down or speed up slightly while going
downhill.
E090200AHM-EU
To increase cruise control set
speed:
Follow either of these procedures:
• Push the RES/+ switch and hold it. Your
vehicle will accelerate. Release the
switch at the speed you want.
• Push the RES/+ switch and release it
immediately. The cruising speed will
increase by 1.6 km/h (1.0 mph) each
time the RES/+ switch is operated in
this manner.
OHM058043N
OHM058046N
OHM058044N