KIA Magentis 2007 User Manual

Page 135

Advertising
background image

Knowing your vehicle

126

3

1. LOAD Button

This compact disc player will accommo-
date up to six compact discs.
To insert multiple discs into the player,
perform the following:

1. Press and release the LOAD Button.
2. Green light on the slot will be illuminat-

ed and the lowest number of empty
slot will blink on the display.
After “WAIT” is displayed on the LCD,
the slot will open with “INSERT” dis-
played on the LCD.

3. Insert a disc partway into the slot, label

side up. The player will pull the disc in.

When the disc is inserted, the disc will
begin to play automatically.

NOTICE

• The disc can be only inserted while the

green light is blinking on the slot.

• This CD player is suitable only for 12

cm discs, do not use irregular shaped
CDs.

To insert multiple discs:

1. Press and hold the LOAD button for

one second or more.
You will then hear a beep sound and
the green light on the slot will be illumi-
nated, and the numbers of empty disc
will blink on the display.

2. After “WAIT” is displayed on the LCD

with the lowest number of empty slot
blinking, the slot will open with “INSERT”
displayed on the LCD.

3. Insert a disc partway into the slot, label

side up. The player will pull the disc in.
Once the disc is loaded, the numbers
of the empty disc will blink on the dis-
play continuously.
If the next “DISC NO.” is displayed when
the slot is illuminated, you can then load
another disc.

4. Load the remaining disc by following

procedures 1 and 2. When you finished
loading 6 discs, the CD player will
begin to play the last CD loaded.

5. To load more than one disc but less

than six, complete Steps 1 and 2.

When you have finished loading discs,
press LOAD button to cancel the loading
function or wait for 10 seconds. The CD
player will begin to play the last CD
loaded. As each CD starts to play, the
DISC number will appear on the display.

NOTICE

The disc player takes up to six discs. Do
not try to load more than six.

2. Playing CD Button

• Press the CD Button to start CD play-

back, during radio operation or cas-
sette tape playing.

• When discs are in the CD deck, if you

press the CD button, the CD player will
begin playing even if the radio or cas-
sette player is being used.

• The CD player can be used when the

ignition switch is in either the “ON” or
“ACC” position.

• Push the CD button to turn on that

function without pushing Power ON-
OFF control knob.

NOTICE

Playback of MP3 and WMA file formats
are supported. Load to play time for
these formats may be longer due to the
compressed nature of these discs.

Advertising