KIA Rio_Rio5 2005 - Manual (Page 170)

6-21
8. Place the jack at the front or rear jacking position
closest to the tire you are changing. Place the jack
under the side sill at the designated location.
9. Insert the jack handle into the jack and turn it
clockwise, raising the vehicle until the tire just
clears the ground, approximately 30 mm (1.2 in.).
Before removing the lug nuts, make sure the
vehicle is stable and that there is no chance for it to
slip or move.
WARNING -Jack Location
To reduce the possibility of injury, be sure to
use only the jack provided with the vehicle and
in the correct jack position; never use any
other part of the vehicle for jack support.
1S2108008
AS2B06014
Jack handle
RIO ENG CNA 6.qxd 7/29/05 5:15 PM Page 21