KIA Rondo 2007 - Manual (Page 186)

4 107
Features of your vehicle
1. TAPE PROGRAM Button
• This allows you to play the reverse side
of the tape by merely pressing the pro-
gram button. The arrow will appear in
the display to show tape direction.
• If you want to turn on the audio and
play the tape loaded in the deck, sim-
ply press the TAPE button.
2. TAPE EJECT Button
• When the button is pressed with a
tape loaded, the tape will be ejected.
• When the button is pressed during
FF/REW mode, the tape will be eject-
ed.
3. AUTO MUSIC SEARCH (AMS)
Button
Press the button to find the starting point
of each song in a prerecorded music
tape. The silent space between songs
(must have at least 4 sec. gap) can be
identified by the AUTO MUSIC SEARCH
button.
• Pressing the button will play the
beginning of the next music segment.
• Pressing the button will replay at
the beginning of the music just listened
to.
• To stop FF or REW action, press the
button again.
4. FF/REW Button
• Forward tape winding starts when the
FF button is pressed during PLAY or
REW mode.
• Tape PLAY starts when the FF button
is pressed again during FF mode.
• Tape rewinding starts when the REW
button is pressed during PLAY or FF
mode.
• Tape PLAY starts when the REW but-
ton pressed again during REW mode.
5. REPEAT (RPT) Button
• To repeat the track you are currently
listening to, press the RPT button. To
cancel, press it again.
• If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until you
push the button again or turn the
power OFF then ON.
6. DOLBY Button
If you get background noise during tape
PLAY, you can reduce this considerably
by merely pressing the DOLBY button. If
you want to cancel the DOLBY feature,
press the button again.
7. EQ Button
Press the EQ button to select the CLAS-
SIC, POP, ROCK, JAZZ and OFF MODE
for the desired tone quality. Each press of
the button changes the display as fol-
lows;
CLASSIC ➟POP➟ROCK➟JAZZ➟OFF