KIA Amanti 2007 - Manual (Page 46)

Knowing your vehicle
36 3
Lap/shoulder belt
To fasten the front lap/shoulder belt:
1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt out
from the retractor.
3. Insert the tongue plate ( ➀ ) into the
open end of the buckle ( ➁ ) until an
audible “click” is heard, indicating the
belt is locked in the buckle.
4. Position the lap portion ( ➀ ) of the belt
across your lap as LOW ON THE HIPS
as possible to reduce the risk of sliding
under it during an accident. Adjust the
belt to a SNUG FIT by pulling up on
the shoulder portion (
➁ ) of the safety
belt. The belt retractor is designed to
take up excess webbing automatically
and to maintain tension on the belt. For
your safety, do not put any excess
slack into the safety belt at any loca-
tion.
S2BLA371 S2BLA372 S2BLA373
➀
➁
➀
➁