KIA Sorento (2011) - Manual (Page 206)

Features of your vehicle
128 4
The Bluetooth ® icon appears on the
upper side of audio display when a
phone is connected.
■ Phone Setup
All Bluetooth ® -related operations can be
performed by voice command or by man-
ual operation.
- By Voice Command:
Press
button on the steering wheel
to activate voice recognition.
- By Manual Operation:
1) Push the “SETUP” button to enter
SETUP mode
2) Select “PHONE” item by rotating the
TUNE knob, then push the knob.
3) Select desired item by rotating the
TUNE knob, then push the knob.
• Pairing phone
Before using Bluetooth
® features, the
phone must be paired (registered) to the
audio system. Up to 5 phones can be
paired with the system.
Note:
The pairing procedure of the phone
varies according to each phone
model. Before attempting to pair
phone, please see your phone’s
User’s Guide for instructions.
Note:
Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer “Deleting Phone” section)
or the vehicle’s information is
removed from the phone.
1. Press button.
2. Say “Set Up”.
- The system replies with available
commands.
- To skip the information message,
press again and then a beep is
heard.
3. Say “Pair Phone”
4. Say “Yes” to proceed.
5. Say the name of your phone when
prompted.
- Use any name to uniquely describe
your phone.
<Recognization>
XM CAN (ENG) 4(102~audio).qxp 4/14/2010 10:53 AM Page 128