KIA Sportage 2009 User Manual

Page 58

Advertising
background image

3 49

Knowing your vehicle

1
2
3
4
5
6
7
8
9

Placing a passenger safety
belt into the auto lock mode

The use of the auto lock mode will
ensure that the normal movement of
the child in the vehicle does not
cause the safety belt to be pulled out
and loosen the firmness of its hold
on the child restraint system. To
secure a child restraint system, use
the following procedure.

Installing a child restraint system by
lap/shoulder belt

To install a child restraint system on
the outboard or center rear seats, do
the following:
1. Place the child restraint system in

the seat and route the lap/shoul-
der belt around or through the
restraint, following the restraint
manufacturer’s instructions. Be
sure the safety belt webbing is not
twisted.

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-
tinct “click” sound.

Position the release button so that it
is easy to access in case of an
emergency.

E2MS103005

E2BLD310

Advertising