Driving your vehicle – KIA Sedona 2010 User Manual

Page 263

Advertising
background image

4 11

Driving your vehicle

The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without resting your foot on
the accelerator pedal.
This system is designed to function
above approximately 40 km/h (24 mph).

To set cruise control speed:

1. Pull the CRUISE ON-OFF button on

the steering wheel to turn the system
on. The CRUISE indicator light in the
instrument cluster will illuminate.

2. Accelerate to the desired speed, which

must be more than 40 km/h (24 mph).

3. Push the COAST/SET switch, and

release it at the desired speed. The SET
indicator light in the instrument cluster
will illuminate. Release the accelerator
at the same time. The desired speed will
automatically be maintained.

The SET function cannot be activated until
approximately 2 seconds after the
CRUISE ON-OFF button has been
engaged.
On a steep grade, the vehicle may
momentarily slow down while going down-
hill.

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING

- Cruise

control

Do not use the cruise control fea-
ture under the following conditions:
• Heavy or unsteady traffic
• Slippery or winding roads
• Situations that involve varying

speeds

WARNING

If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated) the
cruise control can be switched on
accidentally. Keep the cruise con-
trol system off (CRUISE indicator
light OFF) when cruise control is
not in use.

OVQ046003N

OVQ046002N

Advertising