GE P&W Pleated Filters - Memtrex MP-B Pleated Filters - Manual (Page 2)

Page 2 FS1083EN Apr-09
Table 4: Integrity Testing
Table 5: Flow Performance in Clean Water 1
1 Data based on 10” length filter
Additional Information
• Memtrex MP-B filters may be autoclaved or in
situ steam sterilized (up to 257°F [125°C]
30-minute cycles) for a maixmum accumulated
exposure of 10 hours. Alternatively, the
filters may be sanitized with compatible chemi-
cal agents.
• GE certifies that the materials contained in its
Memtrex MP-B pleated filters meet US FDA
requirements for food contact under the appli-
cable regulations in 21 CFR. For further informa-
tion, contact GE technical services. Memtrex
MP-B filters meet the test criteria for USP Class
VI-121°C Plastics.
Table 6: Ordering Information
• Aqueous extracts from Memtrex MP-B filters
contain less than 0.25 EU/ml. The filters typically
exhibit low levels of non-volatile residues. GE
Filter cartridges are designed and manufac-
tured for resistance to a wide range of chemical
solutions. Conditions will vary with each appli-
cation and users should carefully verify chemi-
cal compatibility. Please contact your GE
distributor for more information.
• Table 6 provides more information on ordering
Memtrex MP-B filters.
0.2 µm
0.45 µm
0.65 µm