Sievers 860 laboratory system specifications – GE P&W Ultrapure and Drinking Water TOC Analyzers - Sievers 860 TOC Analyzer and GE Autosampler RT12 User Manual

Page 4

Advertising
background image

Sievers 860 Laboratory System Specifications

1

Total Organic Carbon

Linear Range

0.3 ppb–1.5 ppm TOC

Precision

0.1 ppb or 1%, whichever is greater

Accuracy

± 5% at 500 ppb C of sucrose

Analysis Time

6 minutes

Sample Flow Rate (nominal)

Analysis mode: 0.25 mL/min

Fast Flush (between samples): 0.5 mL/min

Sample pH

<3

Sampling Method

Grab sampling

Operation

PC or standalone operation; one PC can control up to four analyzers

Analyzer Specifications

Power Requirements

100–240

±10% VAC, 60 W, 50/60 Hz

Fuses

T1.6 A, 250 VAC (SloBlo), size 5 x 20 mm (appliance inlet)

Ambient Temperature

10 °C to 40 °C

Normal Operating Environment

Intended for indoor use only

Maximum Relative Humidity

Up to 95%, non-condensing

Maximum Altitude

2

3,000 m (9,843 ft)

Sparge Gas (if used)

Inlet pressure: 30 psig to 50 psig

Sparge Gas Flow Rate

120 mL/min to 150 mL/min

Calibration Stability

Typically stable for 12 months

Outputs

One USB port to support printer or Flash drive, and one Ethernet port

Installation/Overvoltage Category

II

Safety Certifications

CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA C22.2
No. 61010-1

Pollution Degree

2

Display

Color LCD

Dimensions

H: 43.0 cm (16.9 in); W: 21.5 cm (8.5 in); D: 40.5 cm (15.9 in)

Weight

10.5 kg (23.0 lb)

* Trademark of General Electric Company; may be registered in one or more countries.

1

Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.

2

Known to meet performance specifications

300 00240 Rev A

MC12-038

ISO

9001:2008

QUALITY

MANAGEMENT

SYSTEM

The Americas
GE Analytical Instruments
6060 Spine Road
Boulder, CO 80301-3687 USA
T +1 800 255 6964
T +1 303 444 2009
F +1 303 527 1797
[email protected]

Europe/Middle East/Africa
GE Analytical Instruments
Unit 3, Mercury Way
Urmston, Manchester
UK M41 7LY
T +44 (0) 161 864 6800
F +44 (0) 161 864 6829
[email protected]

Asia
[email protected]
[email protected]
[email protected]

For specific country contacts, visit
www.geinstruments.com/sales

www.geinstruments.com

© 2012

,

General Electric Company. All rights reserved.

Advertising