MAX Power HYD325_325 Hydraulic Tunnel Thruster User Manual
Page 8
MANUAL GB SUPER POWER Series 325 HYD Model325
10)
MAINTENANCE
In order to ensure peak performance from your SUPER POWER, the tunnel, the leg and the propellers
must be kept clean.
IMPORTANT: In order to prevent chalky deposits, which cause damage to the oil seals, we
recommend cleaning the shaft and the oil seals first, then applying a layer of silicon oil
before assembling the propellers.
ANNUAL BASIS: CHANGE the anode (if necessary).
CHANGE drive leg oil, if classic (bronze) leg.
CHECK the oil and the hydraulic filtration circuit (only if necessary).
EVERY 5 YEARS:
DRAIN hydraulic oil system and change the filter and refill.
THE MAX-POWER TEAM WISHES YOU SUCCESSFUL MANOEUVRING AND ENJOYABLE
CRUISING.
IT IS IMPORTANT TO KEEP THIS MANUAL ON BOARD!
7