Newport Brass 31-12 Towel Ring_Garment Hook - Manual

Towel Ring / Garment hook
Installation Instructions
Model No. 31-09, 31-12
Recommended Installation by a Professional Contractor
1. Hold the BASE (1) up to desired location and mark the hole loca-
tions on flange.
2. Drill holes in wall at points marked using the appropriate drill size:
· Wood Screw (# 6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
3. Fasten FLANGE (1) to wall using either WOOD/TOGGLE SCREWS
(2). (See Fig. 2)
4. Thread ADAPTER (3) onto FLANGE (1). Secure into place by tight-
ening SETSCREW (4). (See Fig. 2)
5. Place ESCUTCHEON (5) onto ADAPTER (3). (See Fig. 3)
6a. TOWEL RING: Place END POST (6) onto ADAPTER (3) and
secure into place with SETSCREW (4). (See Fig. 4)
6b. GARMENT HOOK: Place END POST (6) onto ADAPTER (3) and
secure into place with SETSCREW (4). (See Fig. 5)
Fig. 1
Fig. 2
Fig. 3
2
1
3
1
5
3
6
3
4
Fig. 4
4
3
6
4
Fig. 5