操作指南, Safety precautions, 保养 specification – Prokit's Industries SS-227 User Manual

Page 4

Advertising
background image

4

CAUTION:

Improper usage can cause serious injury to personnel

and/or

SAFETY PRECAUTIONS

●

Check each component after opening the package to make sure
everything is in good condition. If there are any suspected dam-
age, do not use the item and report the issue to your vendor.

●

Turn OFF the main power switch and unplug the device from
power source when moving the device.

●

Do not strike or subject the main unit (and all its components) to
physical shock. Use carefully to avoid damage to any part.

●

Handle with care.

- Never drop or sharply jolt the unit.

- Contains delicate parts that may break if the unit is dropped.

●

Make sure the equipment is always grounded. Always connect
power to a grounded receptacle.

●

Temperature may reach as high as 480°C when switched ON.

- Do not use the device near flammable gases, paper and other flammable

materials.

- Do not touch heated parts, which can cause severe burns.

●

Disconnect the plug from the power source if the unit will not be
used for a long period.

- Turn off power during breaks, if possible.

●

Use only genuine replacement parts.

- Turn off power and let the unit cool down before replacing any part.

●

The unit may produce a small amount of smoke and unusual odor
during initial usage. This is normal and should not yield any nega-
tive result when reworking.

●

Soldering process produces smoke — use on well ventilated places.

●

Do not alter the unit, specifically the internal circuitry, in any man-
ner.

17

保养

SPECIFICATION

操作指南

C. 睡眠功能

1.烙铁笔设有振动感应器。

2.当烙铁笔处于不使用状态,系统将自动进行倒计时。

3.通过以下方法可调睡眠计时功能。

a . 按住设定按键,过几秒后上排显示为“SET01”,这表明我们 可

以设定睡眠时间。

b. 按加或减按钮可调睡眠计时。如果显示“t000”,这等于睡眠功能

关闭。如果显示“t030”,睡眠功能是打开,并在30分钟后进入睡

眠状态。

c. 重复按设定按键,直到下排显示“SAUE"。此时按减按钮可保存

设定到内存并从设置模式退出。

4.如果睡眠功能倒计时已经开始,屏幕上会显示字母“b”。

5.当显示系统进入睡眠状态显示会有两个破折号“ - - "。如果 想唤醒

系统,拿起烙铁笔或按任何按钮,系统会立即开启,

恢复工作。

D.系统锁定

1.按下面的方法可设定系统锁定功能:

a.按住设定按键,过几秒后上排显示为“SET01”。

b.反复按设置按钮,上排显示“SET02”,下排显示“OFF"。按加或减

按钮可切换“ON”和“OFF”。

c.重复按设定按键,直到下排显示“SAUE";按减按钮可保存设定到内

存里,并从设置模式退出。

d.当系统锁定已启动,按任何按钮,屏幕会显示字“SAFE"指系统被

锁定了。

e.要解开系统锁定,同时按住三个按钮等过10秒后就会解锁。

Advertising