Prokit's Industries SS-969 SMD - Manual (Page 2)

SAFETY INSTRUCTIONS
WARNING
Warnings and cautions are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury or
death.
CAUTION: Failure to comply with a CAUTION may result in injury to the
operator, or damage to the items involved. Two examples are given below.
NOTE: A NOTE indicates a procedure or point that is important to the process
being described.
EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure,
point or process.
Be sure to comply with following WARNINGS and CAUTIONS for your safety.
WARNING
Do not change or disassemble any components related to this product, it may
cause product damaged.
When you need to replace the fuse, be sure turn off the power before
operating.
During working period, do not turn off the power suddenly, the heat gun
should be placed on the heat gun holder until cool off after power turn off,
otherwise it will damage the product。
CAUTION
When the power is ON, the temperature of the hot air and the nozzle ranges
from 100 to 450 (212 to 842 ). To avoid injury to personnel or damage to
℃ ℉
items in the work area, observe the following:
** Do not direct the hot air toward personnel or touch the metal parts near the
nozzle.
** Do not use the product near combustible gases or flammable materials.
** Advise those in the work area that the unit can reach very high temperatures
and should be considered potentially dangerous.
** Turn the power OFF when no longer using the Pro’sKit SS-969 or when
leaving it unattended.
** Before replacing parts or storing the unit, allow the unit to cool and then turn
the power OFF.
To prevent accidents and failures, be sure to take the following precautions:
1